Operatio
n’s manual
Rheometer MDR-01
24
No. 10
Type of required test
-
ts
is Scotch time
.
For example;
ts1
is period of time where torque equal
lowest torque value +1 (ML+1). Start counting from point
of lowest torque value.
-
tc
is Cure time
.
For example;
tc10
is the period of time where rubber set
the cure time 10%. Start counting from point of lowest
torque value. Cure time 100% is time from the start of the
test where lowest torque value (ML) is reached highest
torque value (MH)
.
-
Tc
is Cure torque
.
-
T
is Torque at time
.
-
t
is Time at torque
.
2. How to delete the test sample data
.
2.1) Click on the required name of the test set in the setup form.
2.2) Press
“
Delete (F
4)
”
or F
4
on the keyboard in order to delete the data.
Note:
The data that was tested under the conditions of the selected test set will be
deleted.
3. Selecting the test set
.
3.1) Click on the required name of the test set in the setup form.
3.2) Press
“
Select (F
11)
”
or F
11
on the keyboard.
Note:
Changing the test set, can only be done through this
method.
5.2.4) [Update (F8)]
Can be used for recording the test result from
programme to Excel file format. Proceed according to the following steps;
1. Press the Update (F8) button or press F8 button on keyboard, ExcelForm
screen will be shown as figure 27
.
