Operatio
n’s manual
Rheometer MDR-01
21
No. 7
Space to input the test sample name
No. 8
Latest test results
No. 9
Graph displaying the Torque and temperature test results
No. 10
Test results table, the latest result is displayed on
1
st row.
5.2) Using the Menu bar
5 . 2 . 1 [ Spec (F3) ]
Click on this button to set the test specifications.
The system will display if the test sample is within the “OK” range, or is outside the “NG”
range. Figure 23 shows the Spec setting screen and Figure 24 shows the Spec results
screen.
2
1
3
Figure 23 shows the Spec setting screen
From Figure
2
3, the main components of the Spec screen can be explained,
as follows;
No. 1 Select type of required Spec, number and type depend on sample
value setting as Menu [Setup (F5)] refer to 5.2.3
No. 2 Highest value of the
Spec
No. 3 Lowest value of the Spec
