-4 -
3.Transportation, Storage and Unpacking Installation of
Motorcycle
1.
The motorcycle (with packaging box)should be reliably secured on the transportation vehicle. During
transit, there should be no damage or destruction
.
2.
The motorcycle (with packaging box)should be stored in clean
,
well
-
ventilated
,
dry
,
rain
-
proof and
sun
-
proof warehouse and should not be stored together with the inflammables
,
chemcial corrosives and
other hazardous substance.
3.
This motorcycle is completely installed at the dealer
'
s and is delivered to the users after commissioning.
The installation sequence is as follows:
①
Unpack the box and take out all accessories.
②
Install handle tube.
③
Disassemble the left, right and front shock absorber retaining
bolts
,
take out the rear wheel and support
the vehicle with the side stand or main process stand
(
matching
),
install front brake and front wheel
,
install
storage battery
,
install other accessories
(
rearview mirror and so on)
,
fasten bolts and nuts of the whole car
and inspect the circuit before starting the motorcycle
.
④
Adjust light signal, front and rear brakes, clutch, throttle, and so on and deliver it to users after testing.
The installation is completed.
Transportation, Storage and Unpacking Installation of Motorcycle are only for references
of the dealers.