Part location
Solutions
Insufficient
power
Brake
Brake is thoroughly separated
:
the brake is too tight
Large chain
The drive chain is too tight
:
improper adjustment
Engine
The engine is overheated
:
gas mixture is too thick or thin, poor
engine oil and fuel quality, barrier and so on.
Spark plug
Improper spark plug gap
,
normal range is 0.8-0.9 mm
Intake pipe
Air leakage of intake pipe: long-term use
Cylinder head Air leakage of the cylinder head or air valve
Electric system There is failure
in
electric
system
Air filter
Blocked air filter
Cleaning or adjustment
Inspection or repair
inspection or replacement
Adjustment or replacement
Adjustment or replacement
Adjustment or replacement
Adjustment
Adjustment
Headlight
and tailight
do not work
Cable
Poor circuit contact
Left and right
switches
poor switch contact or the switch is damaged
Headlamp
Bulb and lamp holder inspection
Voltage
regulator
Inspection of the voltage regulator
:
poor contact or burned
Magneto
Magnetor coil inspection
:
poor contact or burned
Hor n do es n
'
t
work
Battery
No power in the
battery
Left switch
Horn button inspection
Cable
Poor circuit contact
Horn
Horn is damaged
Adjustment or replacement
Adjustment or repair
Adjustment or replacement
charging or replacement
inspection or replacement
inspection or replacement
Adjustment or replacement
Adjustment or replacement
Adjustment
The above listed are the common failures of the motorcycle. If there is any failure in your motorcyle, please
contact
“
CFMOTO Service
Station
”
timely for inspection and repair.
It should be noted that: Do not handle motorcycle failures at one's discretion, otherwise
potential safety hazard or safety accident will be caused. The users shall be responsible
for safety accidents due to failure handling at their own discretion.
-6 2-
Problems
Troubleshooting