Quick Start Guide for 3680A/B Cable and Antenna Analyzer
Figure 2.1 Front panel of 3680A/B Cable & Antenna Analyzer
The features of common keys are described as below:
【
Freq
】
: used for measurement parameter settings such as frequency parameter, signal standard, distance
parameter and velocity factor etc.
【
Sweep
】
: used for measurement parameter settings such as trigger mode, scan mode, scan time, scan
points and average / bandwidth etc.
【
Trace
】
: Realize contrastive function of memory trace and current data, including arithmetical operation
such as subtraction and division etc.; or store the current data as trace in memory.
【
Ampt
】
: used for setting display area of Y-axis.
【
Marker
】
: realize functions of marker, including settings like marker ON/OFF, marker mode, peak
search, and marker drag.
【
Cal
】
: realize calibration, including calibration mode, calibration status ON/OFF and selection of
calibration kit models.
【
Save/Recall
】
: used for file operations such as store and recall of measurement state, store and recall of
measured trace, screen capture, storage location and file copy etc.
【
Limit
】
: realize limit functions, including limit ON/OFF, alarm ON/OFF, limit line edit, store / recall
and so on.
【
Run/Hold
】
: used to switch between the results of consecutive switch and keeping current switch of
Analyzer.
【
Meas
】
: Measurement format setting and single / double window switching etc.
【
System/Local
】
: When the Analyzer is in local operating mode, it is used for setting system status, such
as mode switching between cable and antenna analyzer and power test, setting of date, time, power saving
mode, viewing the product serial number and instrument applications version number etc.; when the
Analyzer is in control mode, it is used for switching to local operating mode.
Numerical (character) key: used for inputting numbers or characters
