December 2018
1000-4298 Revision 1.0
www.ceva-dsp.com
© 2019 CEVA, Inc. All rights reserved
4 / 11
Figure 5: Startup Window of Freespace™ MotionStudio 2
Establish Connection to the FSP200 Serial/USB Adapter Board
From the menu panel on the left, select Device Connection. This panel allows users to select device type,
transport protocol and more.
•
“
Device Type
” of the bridge is set to
FTDI Adapter Board
.
•
“Virtual COM Port” available in your PC appears in “
COM9 USB Serial Port
” box.
•
“
Target Device
” set to
SHTP over UART
(default S1 setting)
•
Use “
Connect
” button to start.
