CEVA Hillcrest Labs FSP200 Quick Start Manual Download Page 11

December 2018 

1000-4298 Revision 1.0 

 

www.ceva-dsp.com 

© 2019 CEVA, Inc.  All rights reserved

  

 

11 / 11

 

 

Notices 

© Copyright 09/2019 CEVA, Inc. and/or its subsidiaries (“CEVA”) All rights reserved. All specifications are 

subject to change without notice. 
Freespace is a registered trademark of CEVA. Other company and product names mentioned in this 

document may be the trademark or registered trademark of their respective owners. 

Disclaimer: The information furnished herein is believed to be accurate and reliable. However, the 

information is provided “AS IS”, without any express or implied warranty of any kind including warranties 

of merchantability, non-infringement of intellectual property, or fitness for any particular purpose.  
In no event shall CEVA or its suppliers be liable for any claims and/or damages whatsoever arising out of 

the use of or inability to use the materials. CEVA and its suppliers further do not warrant the accuracy or 

completeness of the information, text, graphics or other items contained within these materials. CEVA 

may make changes to these materials, or to the products described within.  
 

www.ceva-dsp.com 

 

FOR MORE 

INFORMATION:

Summary of Contents for Hillcrest Labs FSP200












Reviews: