-34-
PROPILOT 700 INSTALLATION & SERVICING MANUAL
807-007-5-96
ERROR AND FAULT MESSAGES
If
your
autopilot
detects
a
problem
with
the
system
it
will
display
a
warning
on
the
LCD.
• LOW BATTERY VOLTAGE
To clear the alarm, press any key.
Check the ship’s battery and charging system.
• STEERING MOTOR SUPPLY FAILURE
To clear the alarm, press any key.
Check the supply to the motor.
Alarms ‘EE10’ and above are used by the optional
Navigator Interface and are explained in the Navigator
Control section.
• BACK-UP MEMORY FAULT
To clear the alarm, press any key.
If this fails to clear the alarm refer to the Troubleshooting
Guide.
• RAM MEMORY ERROR
Autopilot will automatically switch to Standby Mode.
Press the AUTO or OFF key. If this fails to clear the alarm
refer to the Troubleshooting Guide.
• EPROM ERROR
Autopilot will automatically switch to Standby Mode.
Press the AUTO or OFF key. If this fails to clear the alarm
refer to the Troubleshooting Guide.
• RUDDER FEEDBACK FAULT
Autopilot will automatically switch to Standby Mode.
Press the AUTO or OFF key. If this fails to clear the alarm
refer to the Troubleshooting Guide.
• NO RUDDER MOVEMENT INDICATED
Autopilot will automatically switch to Standby Mode.
Press the AUTO or OFF key. If this fails to clear the alarm
refer to the Troubleshooting Guide.
• RUDDER FEEDBACK AMPLIFIER FAULT
Autopilot will automatically switch to Standby Mode.
Press the AUTO or OFF key. If this fails to clear the alarm
refer to the Troubleshooting Guide.
L O b A
H d b A
F 0 0 2
F 1 2 8
F 1 2 9
F 1 9 8
F 2 2 4
Error and Fault Messages
F 2 2 5
Summary of Contents for PROPILOT 700
Page 4: ... 4 PROPILOT 700 INSTALLATION SERVICING MANUAL 807 007 5 96 The System ...
Page 14: ... 14 PROPILOT 700 INSTALLATION SERVICING MANUAL 807 007 5 96 InstallationSchematic ...
Page 37: ... 37 PROPILOT 700 INSTALLATION SERVICING MANUAL 807 007 5 96 Rudder Angle Template ...
Page 38: ... 38 PROPILOT 700 INSTALLATION SERVICING MANUAL 807 007 5 96 ...
