Quick Start Guide for AV3680A Handled Cable & Antenna Tester
AC-DC adapter provided together with the instrument must be used if adopting AC power supply. Input of
adapter is AC power supply with 100~240V, 50/60Hz.
When transported and carried by a backpack, the AC-DC adapter should not be connected with the Tester
in order to avoid overheating of the instrument. AC-DC adapter has a wide range of input voltage; therefore
when using, it should ensure the power supply voltage should be within the scope required in Table 2.1.
Table 2.1 Power Supply Requirements
Power Supply Parameter
Applicable Range
Input Voltage
100V
～
240VAC
Rated Input Voltage
1.7A
Operating Frequency
50/60Hz
Output Voltage/Current
15.0V/4.0A
Operating voltage and frequency is subject to that indicated in the nameplate of
supplied power adaptor.
2. Powered by DC power supply
Voltage: 12V
～
18V (with battery uninstalled), 15V
～
18V (with battery installed)
Current: 2A (at minimum)
3. Powered by built-in battery
AV3680A can be powered by rechargeable lithium-ion batteries. If left unused for a long time, the battery
will self discharge, so it must first charge the battery before using it again. Refer to Section 2.6 for battery
usage details. The basic parameters of batteries provided together with the instrument are as follows:
Nominal voltage: 10.8V
Nominal volume ≥7000mAh
Rechargeable battery shall not be exposed to fire and high temperatures (above
70℃), or thrown into the fresh or salt water, and wetted, and shall keep away
from children.
Rechargeable batteries can be reused, and shall be placed in a suitable container
to avoid short circuit. The heavy metals such as nickel and chromium contained in
the battery may pollute the environment, so waste batteries should be placed in a
dedicated battery recycling bin rather than disposed at will ,.
Warning
Warning
