Quick Start Guide for AV3680A Handled Cable & Antenna Tester
Figure 3.17 Start Distance & Stop Distance Set
8. According to Section 3.1 in this Chapter, calibrate port 1 of Tester;
9. Select [Velo Factor] menu to set velocity factor of DUT, as shown in Figure 3.18. Velocity factor, which
is the transmission speed and light speed of electromagnetic wave in the cable, is between 0~1.
Figure 3.18 Velocity Factor Set
10. Select [Cable Loss] menu, and set cable loss of the measured cable according to the known parameters
of DUT, as shown in Figure 3.19.
