CET Kyocera DK-5230 Rebuild Instructions Download Page 4

Page: 4 / 4

Installation & Maintenance Instruction

CET Group Co., Ltd.

www.cetgroupco.com

39.

Do not fully insert the drum axle before reinstalling the grey handle

40.

Reinstall the grey handle

41.

Push the drum axle till it is locked with the locking tab

42.

Reinstall the spring using a small flat bit screwdriver to help guide the spring in place

43.

Remove the paper clips to release the PCR

44.

Make sure the OPC drum rotates smoothly. Wipe off any dust from the PCR with a clean, dry, lint

free cloth as it is rotated by the drum.

45.

To find the components used in this video please visit our web site www.cetgroupco.com

Summary of Contents for Kyocera DK-5230

Page 1: ...the grey handle 3 Release the drum axle locking tab with an awl the locking tab is located behind the spring and the grey handle then push the end of the drum axle a bit to get it out of the opening i...

Page 2: ...1033 20 Take out the new CET cleaning blade 21 Reinstall the cleaning blade aligning the holes with the plastic bosses 22 Secure the cleaning blade with two screws using a PH 2 screwdriver 23 Make sur...

Page 3: ...gear onto the OPC drum hub 33 Remove the protecting wrap from the OPC drum 34 Reinstall the spring hub then reinstall the OPC drum into the drum unit 35 Slide the spring hub tab into the corresponding...

Page 4: ...l it is locked with the locking tab 42 Reinstall the spring using a small flat bit screwdriver to help guide the spring in place 43 Remove the paper clips to release the PCR 44 Make sure the OPC drum...