Cessna 182T 2001, Pilot Operating Handbook

Page: 187 / 254

CESSNA SECTION 7
MODEL 182T AIRPLANE & SYSTEMS DESCRIPTION
The single-slot type wing flaps (Refer to Figure 7-3), are
extended or retracted by positioning the wing flap switch lever on
the instrument panel to the desired flap deflection position. The
switch lever is moved up or down in a slotted panel that provides
mechanical stops at the 10° and 20° positions. To change flap
setting, the flap lever is moved to the right to clear mechanical
stops at the 10° and 20° positions. A scale and pointer to the left
of the flap switch indicates flap travel in degrees. The wing flap
system circuit is protected by a 10-ampere circuit breaker,
labeled FLAP, on the left side of the control panel.
WING FLAP SYSTEM
Figure 7-3. Wing Flap System
Apr 30/01 7-13