Cessna 152 1978 Pilot Operating Handbook Download

Page: 130 / 192

CESSNA AIRCRAFT COMPANY

FOR TRAINING USE ONLY

MODEL 152

8-4

•

SALES AND SERVICE DEALER DIRECTORY

The following additional publications, plus many other supplies that are applicable to your airplane, are

available from your Cessna Dealer.

•

SERVICE MANUALS AND PARTS CATALOGS FOR YOUR

AIRPLANE

ENGINE AND ACCESSORIES

AVIONICS

Your Cessna Dealer has a Customer Care Supplies Catalog covering all available items, many of which he

keeps on hand. He will be happy to place an order for any item which is not in stock.

AIRPLANE FILE

There are miscellaneous data, information and licenses that are a part of the airplane file. The following

is a checklist for that file. In addition, a periodic check should be made of the latest Federal Aviation

Regulations to ensure that all data requirements are met.

To be displayed in the airplane at all times:

Aircraft Airworthiness Certificate (FAA Form 8100-2)

Aircraft Registration Certificate (FAA Form 8050-3)

Aircraft Radio Station License, if transmitter installed (FCC Form 556)

To be carried in the airplane at all times:

Weight and Balance, and associated papers (latest copy of the Repair and Alteration

Form, FAA Form 337, if applicable)

Equipment List

To be made available upon request:

Airplane Log Book

Engine Log Book

Most of the items listed are required by the United States Federal Aviation Regulations. Since the

Regulations of other nations may require other documents and data, owners of airplanes not registered

in the United States should check with their own aviation officials to determine their individual

requirements.

Cessna recommends that these items, plus the Pilot’s Operating Handbook, Pilot’s Checklists, Power

Computer, Customer Care Program book and Customer Care Card, be carried in the airplane at all times.

Summary of Contents for 152 1978

































































































































































































Search results

Summary of Contents for 152 1978

Reviews:

Related manuals for 152 1978

Brands by name

Popular brands

Cessna 152 1978, Pilot Operating Handbook

Search results

Summary of Contents for 152 1978

Reviews:

Related manuals for 152 1978

Brands by name

Popular brands