Warrior CB-9X Console Box Transmitters
U103.1.0
12
7. The
A
and
RF
LEDs light solid when the console box has completed its search
for available receivers. You can now pick which receiver to link to.
8. A found receiver starts to pulse its
Associate
Relay
. (Wire this relay to an
external indicating device
—such as a light or horn—when installing). This alerts
you that the indicated receiver is ready for association. Momentarily lift switch
S13
(NEXT)
UP
to bypass the indicated receiver. To select that receiver,
momentarily lift switch
S14
(SELECT)
UP
.
9. Press the Horn/Start
pushbutton (switch
S12
)
again to pull in the MLC relays.
Once a receiver is selected and the MLC relays are energized, the CB-9X is now linked to that
receiver, and you can run the crane.
Notes:
Each new system
’s transmitters are factory associated before being shipped.
If you purchase a spare transmitter, you will need to associate it yourself before it will work
with that system.
Each transmitter must be associated one time. Once associated with a receiver, that
transmitter will work with that receiver until you clear the receiver ID. (See Section 2.7.)
The transmitter works in a first-come/first-serve basis, where only one transmitter unit can
ever be paired to a receiver unit at a time.
