User Manual
Cervis Inc. Safety Precautions
Read and follow all instructions.
Failure to abide by Safety Precautions may result in equipment failure, loss of
authority to operate the equipment, and personal injury.
Use and maintain proper wiring. Follow equipment manufacturer instructions.
Improper, loose, and frayed wiring can cause system failure, equipment damage, and
intermittent operation.
Changes or modifications made to equipment not expressly approved by the
manufacturer will void the warranty.
Owner/operators of the equipment must abide by all applicable Federal, State, and
Local laws concerning installation and operation of the equipment. Failure to comply
could result in penalties and could void user authority to operate the equipment.
Make sure that the machinery and surrounding area is clear before operating. Do not
activate a remote control system until certain that it is safe to do so.
Turn off the module power before attempting any maintenance. This will prevent
accidental operation of the controlled machinery.
Do not allow liquid to enter the module enclosure. Do not use high pressure
equipment to clean the module.
Operate and store units only within the specified operation and storage temperatures
defined in the Specifications of this document.
