Panel Liner Pool Installation
SPC513
Figure 2
SPC456S
SPC 459
5
GB
Pass niche (SPC456S) into panel wall aperture from pool side and line up 16 holes in niche ‘lip’ with the 16
holes in the panel wall. NB ensure niche is the correct way up - ‘top’ is indicated on the rear of the niche.
Pass back ring (SPC 459) over the rear of the niche and bring up to the back of the wall forming a
‘sandwich’, i.e. niche lip - panel wall - back ring. Secure all parts together using the 4 no.
3
/
4
” self-tapping
screws provided (SPC513). NB ensure that these screws are fixed through the holes marked ‘*’
on drawing #1.