Condensing Pool Heater
16
22/12/08
User Setup Mode
Switch on with the panel switch whilst pressing the Lock/Reset button. then release. The control is now in
Setup Mode.
The control can now be altered by rotating the Pool Temperature Control Knob to a certain position and then
pressing the Lock/Reset button, then switching off. (
See Fig. 9.0
)
Example:
To change from Fahrenheit to Centigrade:
Turn Panel Switch OFF then back ON whilst pressing the Lock/Reset button.
Turn the Pool Temperature Control Knob until the display shows
‘F’.
Press the Lock/Reset button once and the display will show
‘C’.
Switch the Panel Switch OFF then back ON again.
The Control will now display in Centigrade.
Lock/Reset
Button
On / Off
Switch
Temperature
Display
Pool Temperature
Control Knob
Fig. 9.0
User Setup Mode Setting
Factory Setting
Alternative
Display Indicator
1
Display units
° F = Fahrenheit
° C = Centigrade
° F or ° C
2
Maximum temperature
32 °C (90 °F)
41 °C ( 106 °F)
PL or SPA
3
Software Version
e.g 011
Pressure
Gauge
Summary of Contents for MB35S
Page 24: ...Fig 11 0 Condensing Pool Heater 21 22 12 08 Schematic Wiring ...
Page 33: ...Condensing Pool Heater 30 22 12 08 This page has been intentionally left blank ...
Page 34: ...Condensing Pool Heater 31 22 12 08 This page has been intentionally left blank ...
Page 36: ...Station Lane Industrial Estate Witney Oxon Tel 01993 778855 Fax 01993 703407 22 12 08 ...
