17
CONNECTIONS
Connections on pressure washer hoses, gun and spray wand should be cleaned regularly and
lubricated with non-water-soluble grease.
CLEANING THE NOZZLES
Clogging of the nozzle causes the pump pressure
to be too high, making it necessary to clean the
nozzle immediately. You can clean the nozzle by
carefully inserting the cleaning needle or thin,
sharp instrument (i.e., paperclip) into the nozzle
to clean out any deposits.
WATER FILTER SCREEN
The pressure washer is equipped with a water
inlet screen to protect the pump. If the screen is
not kept clean, the flow of water to the pressure
washer will be restricted and the pump may be
damaged.
1. To clean the water inlet screen, remove the
filter screen inside the inlet adaptor.
*
The inlet adaptor comes pre-attached on the
water inlet.
2. Rinse the screen until it is free of debris and
blockage.
3. Place the screen back to prevent any foreign
matter from entering the pump.
CLEANING AND MAINTENANCE
VE17-Certified-Pressure-Washer-EN.indd 17
2019-01-18 10:17 AM
®