aSSE
mbl
Y
model no. 060-3742-2 | contact us 1-844-428-7277
16
SPEED Control ConnECtInG lEVEr
1. Connect the connecting lever and
connecting base with clip (3-1).
2. Connect the connecting lever and speed
adjusting handle with clip (fig. 4).
Speed adjusting handle
3-1
3-1
Speed control
connecting lever
Connecting base
figure 4
SElf-DrIVE Control WIrE anD aUGEr Control
WIrE
1. the auger control wire includes part a and
part b (fig. 5).
2. lift the auger control handle to the upper
position (fig. 5).
3. Hook part a into the auger control handle
(fig. 5).
4. Connect part a and part b of the auger
control wire to get a natural tension station
for the wire. (fig. 5)
5. Hook the self-control wire into the self-
drive handle in the same way.
auger control
handle
Self drive control
handle
Part a
bolt
Part b
figure 5
notICE:
In the process of operation, if the auger or drive control handle is too loose, screw the bolt (fig. 5) of part a to get a
natural tension station for the wire.
Check the slack of the tension and adjust accordingly. You want to make sure that the tension on the lower side of the
snowblower has 1/4-3/8" (6.4-9.5 mm) of movement. If the slack is greater than 5/8" (16 mm), please adjust. Proper
tension is important because you will want your snowblower to move forward properly in heavy snowfalls.
