4
Assembly Instructions
Model Number 060-0198-6 Trailer Sprayer
Tools Needed For Cart Assembly
(2) 1/2” Wrenches
(1) Pair Needle Nose Pliers
(2) 7/16” Wrenches
Remove from Carton
Remove all parts and hardware packages from the carton. Lay out all parts and hardware and
identify them using the illustrations on pages 2 and 3.
Assembly Tip:
Loosely tighten all nuts and bolts at first. Fully tighten when the unit is completely assembled.
1. Place the Tow Bar Tubes under the front of TCT Cart Frame. Take four 1/4 x 2” Hex Head Bolts,
place a 1/4” Flat Washer on each bolt, and insert the bolts into the first two frame holes on each
side.Insert the bolt through the Frame holes and through the Tow Bar Tubes. Add one more 1/4”
Flat Washer to each bolt and secure with 1/4” Nylock Nuts. Insert 1” Tube Plugs into front holes
of Tow Bar Tubes. See Figure 1.
Figure 1.
TCT Cart
Frame
Tow Bar
Tube
1/4”
Nylock
Nut
1/4” Flat
Washer
1/4” Flat
Washer
x 2” Hex
Head Bolt
1’ Tube Plug
1/4
