5
Assembly Instructions
2. Assemble two 1/4 x 3” Hex Head Bolts, four 1/4” Flat Washers, two 1/4” Nylock Nuts and
one 5/16” Spacer. Place one 1/4 x 3” Hex Head Bolt through 1/4” Flat Washer then through
the first side hole in Tow Bar Tubes then through the second tube. Attach a 1/4” Flat Washer
and secure with a 1/4” Nylock Nut. Place another 1/4 x 3” Hex Head Bolt through 1/4” Flat
Washer and insert it into the second side hole on the Tow Bar Tube. Place the 5/16” Spacer in
between the two Tow Bar Tubes and insert the bolt through the 5/16” Spacer and through the
second Tow Bar Tube. Place a 1/4” Flat Washer onto the bolt and secure with a 1/4” Nylock Nut.
See Figure 2.
3. Assemble two Clevis Plates, two 5/16 x 2” Hex Head Bolts, two 5/16” Flat Washers, two
5/16” Hex Head Nuts, one 1/2 x 3 1/2” Clevis Pin and one #14 Hitch Pin Clip. Insert the
5/16 x 2” Hex Head Bolts into the first Clevis Plates on each side over the first bolt
on the Tow Bar Tube. Then insert the bolts through the holes in the second Clevis Plate,
place one 5/16” Lock Washer on to each bolt and secure with a 5/16” Hex Head Nut. Place
the 1/2 x 3 1/2” Clevis Pin through the first large hole in the Clevis Plate and secure with
the #14 Hitch Pin Clip. See Figure 3.
Figure 2
Figure 3
1/4” Flat Washer
1/4” Nylock Nut
1/4” Flat
Washer
x 3” Hex
Head Bolt
5/16” Plastic Spacer
Tow Bar
1/4” Flat Washer
5/16” Lock
Washer
Hitch Pin Clip
Tow Bar
Clevis Plate
Hex
Head Bolt
Clevis Pin
5/16” Hex Head Nut
5/16” Flat Washer
1/4
5/16 x 2”
