Troubleshooting Guide
Manually Removing a Cartridge
82
Figure 26.
LTO-1 and LTO-2 drives Showing the Tape Grabber Near the Cartridge
10.
When the leader pin and the tape grabber reach the cartridge, gently push the grabber
toward the front of the cartridge. Use the grabber to push the leader pin gently into the car-
tridge until it seats in place (you should hear a click).
11.
Using a flat-blade screwdriver, pivot the white lower track toward the drive bezel to disen-
gage the leader pin.
12.
After the grabber has released the leader pin, pull the loader arm out of the way.
13.
Use a flat-blade screwdriver to turn the worm gear counter clockwise (to the left). Figure 27 on
page 83 shows the location of the worm gear. This will gradually raise the cartridge elevator
and cause the cartridge to slide partially out of the drive.
