Product Specifications
Power supply rating:
AC 220-240V~ 50Hz
Tank capacity:
300ml
Max capacity of water cup:
175ml
Rated power:
900W ~ 1050W
Steam pressure:
2.5 ~ 4.2bar
Injected steam capacity:
28g/min
Overall dimensions:
250 x 140 x 230mm
Net weight:
1.85kg
Operating Procedures
1. Unpack the product, check accessories and make sure all parts are
present and undamaged.
2. Before use, read the user manual thoroughly and carefully. The steam
cleaner is only for household use.
3. First, place the steam cleaner on a level platform. Push the safety cover
down, then unscrew the safety cap anti-clockwise, as shown below. Then
install the funnel.
4. Take 175ml of clean water with the measuring cup and then add the water
into the tank. (Max. capacity of the tank is 300ml. Do not overfill the tank,
and note that some space must be left in the tank.) Replace the safety cap
and tighten it into position.
5. Check the power supply and socket to make sure they are plugged in
securely. Then turn power supply on.
6. After about 4 minutes, the steam will be ready. To confirm this, lightly
press the steam button and check that steam vapors are being sprayed
out of the nozzle. (Do not aim the nozzle at other people or animals).
7. If steam vapors are coming out, release the steam button and install
whichever accessory is required for your use.
8. Once the accessory is fitted, press the steam button again to use product.
3
Press
down
Turn
left
