background image

Safety

Do not allow children to use this machine. Keep the unit out of reach of 
children when not in use.

This device is not intended for use by persons (including children) with 
reduced physical, sensory or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or instruction 
concerning use of the appliance by a person who is responsible for their 
safety.

To prevent electric shock, do not immerse power cord or power plug in 
water or other liquids.

The power cord and power plug should be in good condition and should 
not be damaged. Damaged or defective power cords and power plugs 
must not be used, and must be repaired or replaced.

The product is designed only for use in households and is not suitable for 
industrial applications.

Do not turn on the power supply until the tank is full of water.

During operation, the tank mouth must be plugged hermetically and the 
safety cap should be tightened in position.

While in use, the body of the unit should not be included at an angle 
greater then 45 degrees. Otherwise the boiling water may be sprayed out 
together with the steam.

Do not direct steam towards other people, animals or electrical products.

Before refilling the water, ensure the power cord has been unplugged 
from the power supply. It is necessary to unplug the power cord after the 
machine has been used, before it is cleaned and while it is being repaired.

Do not add rust remover, odour counteracting agents, alcohol or 
detergents into the water tank.

The filling aperture must not be opened during use.

Never overfill the tank as the steam generation may be effected.

Before Use

Unpack the product.
Read the user manual carefully.
Check the accessories to ensure that all accessories have been provided.

Accessory

Qty

Funnel

1

Measuring Cup

1

Extended Connecting Spray Nozzle

1

Towel Sleeve

1

Long Spray Cup

1

Spray Cup for Doors/Windows

1

Spray Cup with Round Brush

1

Bent Spray Cup

1

Quick Start Guide

1

Spray Cup Connecting Pipe

1

2

Summary of Contents for CTSTMCLN900A






Reviews: