Cerio PS-200N-AX User Manual Download Page 82

Page: 82 / 131

CERIO software core : cen_v3.0



Keep Default MAC Address :

Keep the default MAC address of WAN port on the

system.



Clone MAC Address :

If you want to clone the MAC address of the PC, then click

the

Clone MAC Address

button. The system will automatically detect your PC's

MAC address.



Manual MAC Address :

Enter the MAC address registered with your ISP.

Click

Save

button to save your changes. Click

Reboot

button to activate your changes

5.4 Configure PS-200N-AX LAN IP Address

Here are the instructions for how to setup the local IP Address and Netmask. Please click on

System -> LAN

and follow the below setting.



LAN IP Setup :

The administrator can manually setup the LAN IP address.



IP Address :

The IP address of the LAN port; default IP address is 192.168.2.254



IP Netmask :

The Subnet mask of the LAN port; default Netmask is 255.255.255.0

The Clone MAC Address field will display MAC address of the PC
connected to system. Click “Save” button can make clone MAC
effective.

Summary of Contents for PS-200N-AX




































































































































Search results

Summary of Contents for PS-200N-AX

Reviews:

Related manuals for PS-200N-AX

Brands by name

Popular brands

Cerio PS-200N-AX, User Manual

Search results

Summary of Contents for PS-200N-AX

Reviews:

Related manuals for PS-200N-AX

Brands by name

Popular brands