CERIO software core : cen_v3.0
3.6 WDS Setup
The administrator could create WDS Links to expand wireless network. When WDS is enabled,
access point functions as a wireless bridge and is able to communicate with other access points
via WDS links. A WDS link is bidirectional and both side must support WDS. Access points know
each other by MAC Address. In other words, each access point needs to include MAC address of
its peer. Ensure all access points are configured with the same channel and own same security
type settings.
Please click on
Wireless
->
WDS Setup
and follow the below setting.
Security Type
: Option is “Disable”, “WEP”, “TKIP”or “AES” from drop-down list. Needs the
same type to build WDS links. Security type takes effect when WDS is enabled.
WEP Key
: Enter 5 / 13 ASCII or 10 / 26 HEX format WEP key.
AES Key
: Enter 8 to 63 ASCII or 64 HEX format AES key.
WDS MAC List
Enable
: Check “
Enable
” to create WDS link.
WDS Peer's MAC Address
: Enter the MAC address of WDS peer.
VLAN Tag(ID)
: Virtual LAN, the system supports tagged VLAN with WDS. To enable
VLAN function; valid values are from 0 to 4094; space is disabled.
