Ceriatone Dizzy 30, User Manual, Page: 9 / 16

9
IMPEDANCE three-way rotary selector. Set this selector to the position that matches the impedance of your speaker cabinet.
NOTE – if you are using two speaker cabinets in parallel (ex – two 16 Ohm cabinets), set the impedance selector to half that of
a single cabinet (in this case, 8 Ohms).
EFFECTS LOOP CH1 ¼ ” stereo instrument jack can be used to add effects to the NORMAL channel of the Dizzy 30. Because
one stereo jack is used for the effects loop, we recommend a stereo plug (male) into a Y-cable mono jack (female) adapter.
One jack of the Y will function as the send; one will function as the return for the effects loop. The effects loop is passive.
Because each channel has it’s own loop, it is difficult to use a mono pedal for both channels.
EFFECTS LOOP CH2
¼ ” stereo instrument jack can be used to add effects to the NORMAL channel of the Dizzy 30. Because
one stereo jack is used for the effects loop, we recommend a stereo plug (male) into a Y-cable mono jack (female) adapter.
One jack of the Y will function as the send; one will function as the return for the effects loop. The effects loop is passive.
Because each channel has it’s own loop, it is difficult to use a mono pedal for both channels.