Ceriatone Dizzy 30, User Manual, Page: 3 / 16

3
2) QUICK SETUP (for instant gratification)
1) Plug your guitar using a 1/4” instrument cable into the input “1” in either the left (normal) or right (EF86) jack
2) Plug a suitable power cable from the DZ30’s rear panel AC MAINS cable inlet to your wall power receptacle
3) Plug the DZ30 into your speaker cabinet using 1/4” speaker cable
4) Set the IMPEDENCE selector to the match the impedance of your speaker cabinet
5) Set channel controls at 10:00 (clock face)
6) Set CUT at 12:00 (clock face)
7) Set MASTER at 10:00 (clock face)
8) Set front panel POWER switch in the upward ON position (with adjacent switch to STANDBY) for 30 seconds to allow
tube filaments to warm up
9) Set front panel STANDBY switch upward to the ON position
10) ROCK!!!!!!