FibeAir® IP-10G
Installation Guide
Ceragon Proprietary and Confidential
Page 54 of 71
3 Select
Configuration > General > Licensing
. The Licensing page opens.
4 Enter the license key in the
License code
field.
5 Click
Apply
.
6 Perform a cold reset of the IDU. The new license will take be activated only
after a cold reset.
7 Select
Configuration > General > Licensing
. The Licensing page opens.
8 Verify that the license parameters were updated.
Notes:
If the license key itself is not legal (e.g., a typing mistake or
an invalid serial number), a License Violation alarm is raised
specific to the problem with the license. In the event of a
License Violation alarm, radio port capacity is automatically
limited to ~3Mbps, allowing only management channels to
the remote end. In order to clear the alarm, you must
configure the system to comply with the loaded license, then
issue a cold-reset. When the system returns online, it checks
the legality of the configuration against the license limits. If
no violation is detected, no alarm is raised, and the radio is
fully operational.
You may use the Demo license for 60 days for full capacity
and a full feature-set.
Configuring XPIC on page 36are followed correctly.
