Radikal Gasser
Page 25
ELECTRONICS TRAYS
7
6
4
5
3
2
1
CNM2.5x6FHCS
CNM3x30ST
HI3129
HI3129
M3x30 Phillips Tapping Screws(
自攻螺丝
)
CNM3x30ST
HW6113A
HW6113AS
HI6113B
No.
Description
Qty
1
2
3
4
6
7
5
Part #
1
4
1
Canopy Mount Hook(
机头罩扣
)
1
Frame Support Bar(
铝柱
)
Lower Electronics Tray(
接收机固定板
)
Upper Electronics Tray(
变速器固定板
)
1
Canopy Mount Spacer (
机头罩扣座
)
2
Flush Head Cap Screws(
斜头内六角螺丝
)M2.5x6
CNM2.5x6FHCS
8
BAG 3
Start by installing the four M2.5x6 flush head cap screws into
the lower electronics tray by using medium threadlock. Use
the M3x30 Phillips tapping screws to mount the canopy hook.
Do not overtighten this as you can strip the plastic.
Next apply medium threadlock to the remaining four M2.5x6
flush head cap screws and install them into the upper elec-
tronics tray. Tighten to the frame support bars.
If you have carbon fiber frames, just add a “C” to the end of the frame
part number.
