15
Maintenance
Service Schedule
Power Cord
Daily
Inspect for wear, fraying or cuts.
Filter
Daily
Inspect, vacuum up to 3 times, replace as needed
Coils
Monthly
Inspect, clean when visibly dirty
Heat Exchange Block
Monthly
Inspect, clean with compressed air only when needed.
Condensate Pump
Monthly
Inspect, clean when needed.
Condensate Drip Tray
Monthly
Inspect, clean when needed.
Cleaning Dehumidifier
Do not perform any cleaning operations with the
unit plugged into power.
N'effectuez aucun nettoyage
avec l'unité branchée
à la source d'alimentation électrique.
To maximize dehumidifier performance, replace the air
filter often and clean the internal components when
they become dirty.
1.
Unplug machine from power.
2.
Remove drain tube from machine.
3.
Remove the two upper screws on each side of the
machine, and the four upper screws on the back of
the machine.
4.
Remove the filter to ease lifting the upper housing.
Lift the upper housing up and forward. the sides of
the housing must be flared out to prevent interfer-
ance with the cassette.
5.
Remove the condensate hose from the hosebarb
on the inside of the upper housing.
6.
Disconnect the control panel wires from the display
board.
7.
Remove the lower back screws and lower side
screws. To access the screws behind the wheels,
remove the wheels.
8.
Turn the cord strain relief to loosen the cord
connection. Push the power cord into the cassette,
to allow the cassette to be removed.
9.
Lift the cassette out of the lower housing.
Do not use high pressure water to clean any of the
internal components of the dehumidifier.
N'utilisez pas l'eau à haute pression pour nettoyer
les composants internes du déshumidificateur.
10. Inspect all internal components for debris buildup.
11. If necessary use a foaming refrigerant coil cleaner
to clean the evaporator and condenser.
12. Wash the air-to-air heat exchanger and any other
internal components that have debris buildup with
warm soapy water.
86356330 Crusader Dehumidifier
