14
Operations
Operating Dehumidifier
Never allow anything to block intake airflow. Be
careful of objects which could be drawn against
intake. The dehumidifier must sit on a level surface.
Always position and orient machine before turning
on.
Ne permettez jamais à quoi que ce soit de bloquer
l'entrée d'air. Faites attention aux objets qui pour-
raient être attirés contre l'entrée d'air. Le déhumidi-
fier doit reposer sur une surface de niveau. Dirigez
et orientez toujours le déhumidifier avant de
l'allumer.
For best results, operate dehumidifier in enclosed
space. Close all exterior doors and windows. Keep
traffic through drying area to a minimum
1.
Connect drain hose to condensate pump’s quick
connect fitting.
2.
Uncoil and straighten entire hose; to prevent water
backing up to pump and leaking.
3.
Place other end in a sink drain bucket or outside,
no more than 10 ft above pump.
NOTE: If a bucket or other receptacle is used for
water collection, check and empty regularly to
prevent spills.
4.
Plug in electrical cord into 115 volt GFCI protected
outlet rated for minimum 15 amps.
5.
Turn the machine on.
Purging Dehumidifier
1.
After space reaches desired humidity level, press
the drain button. This manually empties water from
the condensate pump reservoir.
2.
Disconnect drain hose.
The drain hose will be full of water. Take precautions to
avoid spilling in undesirable areas.
!
ATTENTION:
86356330 Crusader Dehumidifier
