background image

Section 8

8-8

Control Operation Guidelines

WARNING! Improperly maintained controls are hazardous and may cause 
sudden loss of control. Make sure all shift/throttle hardware and cables are 
regularly inspected and maintained. Improper maintenance may result in a 
loss of control, resulting in serious injury or death.

• Most throttle and shift controls have a neutral detent locking lever that must be 

released before shifting from NEUTRAL.

• Always pause in NEUTRAL before shifting from FORWARD to REVERSE, or 

REVERSE to FORWARD. Most throttle and shift controls have a detent position 
for NEUTRAL, FORWARD and REVERSE engagement positions. Engine 
damage may occur if you rapidly shift into gear without pausing or allowing the 
engine RPM to lower into the approved shifting range.

• When traveling at high speed, never shift into REVERSE while the boat is in 

FORWARD gear.

• Always keep the shift control clean and clear of obstructions. 

NOTICE: All shift 

and throttle controls are equipped with a safety switch for start-in-gear 
prevention. Place the control in the NEUTRAL position before you attempt to 
start the engine.

• Never attempt to shift when the engine is not running. 

Centurion Ri Dash

Figure 8-8           

Start Switch

Summary of Contents for Fi21



































































































































































































Reviews: