Centurion 236.17.0 Translation Of The Original Operating Instructions Download

Page: 61 / 66

Handover report

The above-described CENTURION pedelec was delivered to the

customer ready for use, i.e. after its final assembly, inspection and

functional check as described below (additionally required routines in

parentheses).

Lighting

Brakes front and rear

Suspension fork (adjusted to suit customer)

Rear shock (adjusted to suit customer)

Wheel set (trueness/spoke tension/tire pressure)

Handlebars/stem (position/bolts checked with torque wrench)

Pedals (adjustment of release force if necessary)

Saddle/seat post (height and position of saddle adjusted to suit

customer, bolts checked with torque wrench)

Gears (limit stops!)

Bolted connections of attachment parts (check with torque wrench)

Other routines performed

Test ride

CENTURION dealer

Last name

Street

City

Phone

Fax

E-Mail

Handover date, stamp and signature of the CENTURION dealer

The customer confirms with his signature that he received the

CENTURION pedelec in proper condition along with the accompa-

nying documents specified below and that he was instructed on the

proper use of the CENTURION pedelec.

User manual/Operating instructions with CENTURION CD-ROM

Additional instructions

The brake system

Suspension seat post

Pedal system

Suspension fork/rear shock

Seat post, stem

The gears

Others

System instructions of the drive manufacturer

Customer

Last name

First name

Street

ZIP code/city

Phone

Fax

E-Mail

Location, date, signature

Summary of Contents for 236.17.0



































































Search results

Summary of Contents for 236.17.0

Reviews:

Related manuals for 236.17.0

Brands by name

Popular brands

Centurion 236.17.0, Translation Of The Original Operating Instructions

Search results

Summary of Contents for 236.17.0

Reviews:

Related manuals for 236.17.0

Brands by name

Popular brands