Centurion 236.17.0 Translation Of The Original Operating Instructions Download

Page: 17 / 66

A lighting set that corresponds to the regulations

is a must on public roads. Turn on the lights as

soon as dusk sets in.

For more information see the chapter “Legal re-

quirements for riding on public roads” of your

comprehensive original CENTURION user man-

ual on the enclosed CENTURION CD-ROM.

11. In case you have a CENTURION pedelec with

suspension, press down on your CENTURION

pedelec and see whether the spring elements

retract and extend as usual

(a)

For more information see the chapters “Sus-

pension forks”, “Rear shocks” and “Suspen-

sion seat posts” in this translation of the original

CENTURION operating instructions as well as in

your comprehensive original CENTURION user

manual and in the instructions of the component

manufacturers on the enclosed CENTURION

CD-ROM.

12. If your bike has a kickstand, make sure it is fully

raised

(b)

before you set off. Risk of an accident!

13. Do not forget to take a high quality D-

(c)

or chain

lock with you on your ride. The only way to effec-

tively protect your CENTURION pedelec against

theft is to lock it to an immovable object. It is also

recommended to always remove the recharge-

able battery, the drive HMI or the command

console or the display from the CENTURION

pedelec.

Improperly closed fastenings, e.g.

quick-releases, can cause parts of your

CENTURION pedelec to come loose.

This can result in a serious accident!

Be aware that the distance you need to

stop your pedelec increases, when you

are riding with your hands on bar ends

or on multi-position handlebars. The brake levers

are not always within easy reach.

Do not use your CENTURION pedelec, if

it fails on one these points! Riding a de-

fective CENTURION pedelec can result

in serious accidents! If you are in doubt or if you

have any questions, contact your CENTURION

dealer.

During use your CENTURION pedelec

is undergoing stress resulting from the

surface of the road and from the rider’s

action. Due to these dynamic loads, the different

parts of your pedelec react with wear and fatigue.

Please check your CENTURION pedelec regular-

ly for wear marks, scratches, deformations, color

changes and any indication of cracking

(d)

. Com-

ponents which have reached the end of their ser-

vice life may break without previous warning. Let

your CENTURION dealer maintain and service

your CENTURION pedelec regularly. In cases of

doubt it is always best to replace components.

Summary of Contents for 236.17.0



































































Search results

Summary of Contents for 236.17.0

Reviews:

Related manuals for 236.17.0

Brands by name

Popular brands

Centurion 236.17.0, Translation Of The Original Operating Instructions

Search results

Summary of Contents for 236.17.0

Reviews:

Related manuals for 236.17.0

Brands by name

Popular brands