Centsys Nova Helix, Operation Manual

Page: 20 / 36

page 20 www.centsys.com
Latch
Setting
Panic
Setting
Pulse Time Latch State
SS II
Counter
Channel 1 Disabled Disabled 350ms Off Zeroed
Channel 2 Disabled Disabled 350ms Off Zeroed
Channel 3 Disabled Disabled 350ms Off Zeroed
Channel 4 Disabled Disabled 350ms Off Zeroed
Channel 5 Disabled Disabled 350ms Off Zeroed
Channel 6 Disabled Disabled 350ms Off Zeroed
Channel 7 Disabled Disabled 350ms Off Zeroed
Channel 8 Disabled Disabled 350ms Off Zeroed
Channel 9 Disabled Disabled 350ms Off Zeroed
Channel 10 Disabled Disabled 350ms Off Zeroed
Channel 11 Disabled Disabled 350ms Off Zeroed
Channel 12 Disabled Disabled 350ms Off Zeroed
Channel 13 Disabled Disabled 3s Off Zeroed
Channel 14 Enabled Disabled 350ms Off Zeroed
Channel 15 Disabled Enabled 350ms Off Zeroed
Channel 13 Striker/Maglock activation
Channel 14 Holiday lockout (or equivalent bi-stable function)
Channel 15 Duress or alarm panic activation
Simultaneous
Activation
Sticky Latch
Beep-On-
Activation
Special Feature
Setting
Enabled Enabled Disabled
Table 6 details the respective default settings when a Settings Memory Erase operation is
performed.
It should be clear from Table 5 that channels 13, 14, and 15 are special channels. These
channels were given special default settings so that a user can easily learn to channels
that enable particular functionality. Table 7 outlines the potential special purposes.
Table 8 details the respective default settings for the receiver's special features.
Single-channel receiver variants perform a limited subset of the operations performed
during the erase procedures. The table below is equivalent to Table 5, but outlines the
erase operations for the single-channel variants.
TABLE 6. OUTPUT SETTINGS
TABLE 7. CHANNELS WITH SPECIAL DEFAULT FUNCTIONALITY
TABLE 8. DEFAULT SPECIAL FEATURE SETTINGS
TH
E
JUMPER
INTERFA
CE
S
ECTION
4