Centron Technologies MS930A, Service Manual

Page: 26 / 54

4 - 6
Note 2 : The command $M,0
½
changes system mode from remote command mode to
local mode. Another way to change system mode to local is turning system power
switch off and then on again, as power-on default mode is local mode.
Note 3 : To enter the command $S,1
½
to start sealing, you should hit 5 keys every time.
It is not an easy job to repeat 5 keys every time.
To do it simple, you can save the command in a 'Function' key in the program.
On menu bar, click Settings - Function Keys.... In Function Keys dialog box, you
can set up to 8 function keys, and then only one stroke inputs a command once.
Note 4 : You can save the settings you have used in a configuration file to use later.
On menu bar, click File - Save As.... In File Save As dialog box, give a name for
your file. File extension will be *.trm. When the file is called by clicking File -
Open...., you will have same settings as before.