Centrometal CentroPelet ZV14, Technical Instructions, Page: 7 / 12

UT05
Pellet boiler stove first start-up time adjustment
This parameter indicates the time at which the pellet boiler
stove will be started: use buttons and to set the
desired time, with 10-minute steps.
Press button to go to the following parameter.
UT06
Pellet boiler stove shutdown time adjustment
This parameter indicates the time at which the pellet boiler
stove will be turned off: use buttons and to set the
desired time, with 10-minute steps.
Press button to go to the following parameter.
UT07
Week day selection
Press button to select the days of the week. Press
button to enable (ON) or disable (OFF) the pellet boiler
stove start-up day as shown in the following table:
Upper
display
MEANING
Day 1
Day 2
Day 3
Day 4
Day 5
Day 6
Day 7
Lower
display
In the following example, the pellet boiler stove is only star-
ted on Saturdays and Sundays.
off 1 off 2 off 3 off 4 off 5 on 6 on 7
Confirm and continue with key .
If the stove is controlled by an external thermostat, when
the thermostat reaches the preset temperature,
‹'%16'4/Œ
will be shown on the pellet boiler stove display.
CAUTION!
the room temperature thermostat does not turn off and on
the pellet boiler stove; it sets the stove in saving mode
.
UT08 UT16
continue as indicated above to set the second, third and
fourth ignition times.
Monday
Tuesday
Wednesday
Thursday
Friday
Saturday
Sunday
ON1/OFF1-Yes or No
ON2/OFF2-Yes or No
ON3/OFF3-Yes or No
ON4/OFF4-Yes or No
ON5/OFF5-Yes or No
ON6/OFF6-Yes or No
ON7/OFF7-Yes or No
Day 1
Monday
Day 2
Tuesday
Day 3
Wednes.
Day 2
Thurs.
Day 2
Friday
Day 2
Saturday
Day 2
Sunday