Centrometal CentroPelet ZV14, Technical Instructions, Page: 6 / 12

GB
Heating timer-thermostat
Parameter Description
Programmable
values
UT01
฀ ฀ ฀
H. timer-thermostat ena-
bling and disabling. Day of
the week setting
UT02
From 00 to 23 Current hour setting
UT03
From 00 to 60 Current minutes setting
UT04
Reserved Technical parameters setting
UT05
From 00:00 to 23:50 with
10-minute steps Pellet boiler stove first start-
up time adjustment
UT06
From 00:00 to 23:50 with
10-minute steps
Pellet boiler stove first shut-
down time adjustment
UT07
฀ ฀ ฀ ฀
from 1 to 7
Week day selection, first
time activation
UT08
From 00:00 to 23:50 with
10-minute steps
Pellet boiler stove second
start-up time adjustment
UT09
From 00:00 to 23:50 with
10-minute steps Pellet boiler stove second
shutdown time adjustment
UT10
฀ ฀ ฀ ฀
from 1 to 7
Week day selection, second
time activation
UT11
From 00:00 to 23:50 with
10-minute step Pellet boiler stove third
start-up time adjustment
UT12
From 00:00 to 23:50 with
10-minute step Pellet boiler stove third shu-
tdown time adjustment
UT13
฀ ฀ ฀ ฀
from 1 to 7
Week day selection, third
time activation
UT14
From 00:00 to 23:50 with
10-minute steps
Pellet boiler stove fourth
start-up time adjustment
UT15
From 00:00 to 23:50 with
10-minute steps
Pellet boiler stove fourth
shutdown time adjustment
UT16
฀ ฀ ฀ ฀
from 1 to 7
Week day selelction, fourth
time activation
The meaning of the user parameters are explained in detail
below:
UT01
Heating timer-thermostat enabling and disabling and
current hour setting.
This parameter is used to set the current day of the week or
to deactivate the set programming.
Press buttons and to select the desired value as
shown in the following table:
Upper
Display
MEANING
Day 1
Day 2
Day 3
Day 4
Day 5
Day 6
Day 7
OFF
Example:
฀ ฀ ฀ ฀ ฀ ฀ ฀ ฀ ฀ ฀ ฀
start the pellet boiler stove manually (without programming)
so that the heating timer-thermostat is disabled.
Press button to go to the following parameter.
UT02
Current hour setting
This parameter is used to set the current hour, press
buttons and to select the current hour.
Press button to go to the following parameter.
UT03
Current minutes setting
Press buttons and to adjust current minutes.
Press buttons to go to the following parameter.
UT04
Technical parameters setting
Press button to go to the following parameter.
The heating timer-thermostat function is used to program
the pellet boiler stove to automatically turn on and off within
a period of one week.
To access programming, hold down button for around
three seconds, “UT01” will be shown on the upper display:
by pressing button several times and referring to the
table below, the stove can be programmed according to
your needs. Press button to exit the programming phase
at any time.
These are the heating timer-thermostat parameters:
Tuesday
Wednesday
Thursday
Friday
Saturday
Sunday
Heating timer-thermostat disabled
Monday