Centrometal CentroPelet ZS, Instruction Manual

Page: 30 / 110

30
ECONO
TURBO
SEND
SLEEP
AUTO
CANCEL
ON1
ON2
OFF1
OFF2
1
2
3
Temperatura impostata
How to change the power
Use the key (1)to select the power of the stove. The
marks (2) on the display of the remote control indicate
the five possible powers. Press the key SEND (3) to con
-
firm your selection. The control panel will display P-1; P-2;
P-3; P-4; P-5 according to the set power. You can also se
-
lect the automatic function. Please refer to the paragraph
on the Automatic Power Function to understand how the
stove works in this mode.
ECONO
TURBO
SEND
SLEEP
AUTO
CANCEL
ON1
ON2
OFF1
OFF2
2
1
3
ECONO
TURBO
SEND
SLEEP
AUTO
CANCEL
ON1
ON2
OFF1
OFF2
1
2
How to change the temperature
You can change the temperature using the keys (1)
and (2). The temperature range goes from a min. va -
lue of 7°C to a max. value of 40°C. Once you have chosen
the wished temperature, confirm your selection pressing
the key SEND (3).
Automatic Power Function
To enter this function, press the key (1) until you see
the symbol on the display. Press SEND (2) to transmit
your selection. You will read the word “AUTO”
When you select this mode, the pcb will set the working
power automatically according to the difference in de -
grees between the set temperature and the temperature
idientified by the sensor on the back of the stove.
Press once more, select the wished power and press
SEND to go back to the usual functioning.
GB