DP-4 SPECIFICATIONS:
Probing directions
X+/-, Y+/-, Z-
Unidirectional repeatability (2 sigma)
0.00004” (1 micron)
Probe deflection force (X,Y)
3 ounce minimum with 40mm stylus
Pre-travel variation X-Y plane
0.001” with 40 mm stylus
Probe deflection force (Z)
9 ounce minimum
Probe body diameter and length
D= 1.25” (31.8mm) L= 2.2” (56.4mm)
Mounting shank diameter and length
D= 0.5” (12.7mm) L= 1.47” (37.2mm)
Stylus mount thread
M3
Output signal
Switch (FET open drain) 30V 50mA
Output logic
Selectable normally open or closed
Power supply required
10 – 30 VDC 50mA
LED status indicator
green = ready, red = tripped
Weight of probe and ½”shank
0.45 lb
Over travel limit angle (X,Y)
+/- 10 degrees from vertical
Over travel limit (Z-)
0.15” (3.8mm)
Environmental
IP54, Dust Proof
Note: To calculate actual X or Y over travel distance multiply stylus length by 0.173
2
