6
7
Mounting the SA1DK Controller
1) Before starting, select the location to mount the SA1DK controller. This location should be at
shoulder height and on the same side as the door handle.
2) The SA1DK is designed to be easily mounted to a US Gang Box. Remove the Bezel Screw.
(Use the diagram below to help you locate the Bezel Screw)
3) Screw the controller onto a US Gang Box through the two Mounting Holes provided. (See
diagram on the next page to help you locate the US Gang Box mounting holes)
4) Pass the wires through the exit/entry holes and attach them to the controllers terminal blocks as
shown in the wiring diagrams. (Wiring diagrams for common installations can be found on pages
9 to 11).
5) Replace the controller’s bezel and replace the factory default screw with the security screw that
is provided in the Installation Kit. A security screw tool is also provided in the Installation Kit.
Installation
Mode LED
Door LED
3 x 4 Matrix Keypad
Terminal Blocks
Mounting Hole
Mounting Hole
Bezel Screw
Bell Button
Summary of Contents for SA1DK
Page 1: ...SA1DK Instruction Manual ...
Page 16: ......