37
CALLER ID OPERATION
You can also press [Flash] to switch between calls.
Call Waiting ID Options Set to ON (see page 26)
If there is an incoming call during a conversation, soft
key labels for Call Waiting ID Option features will be
automatically shown on the display.
For more options to dispose the waiting call, press
[OPTIONS] soft key.
The following options are available.
[ANS]:
Put the first call on hold and answer the waiting call.
[CONF]:
Add the waiting call to your first call.
[HOLD]:
Place the waiting call on hold and send a hold announcement.
[DROP ANS]:
End the first call and answer the waiting call.
[SAY BUSY]:
Play a pre-recorded message from your phone company that the line
is busy and end the waiting call.
Tip:
You must disposition the call within 26 seconds of the Call Waiting tone.
Note:
Call Waiting ID Option may not be available in all areas. Contact your local telephone company
for details.
Call Waiting ID Option: CONF
If [CONF] soft key is pressed, “CONFERENCE” will
be displayed for a short while and then the waiting
party is being added to the original call as a 3-parties
conference call.
After the 3-parties conference call, you may select to drop a line and retain the other:
• To drop the first caller (the original call), press [DROP]
soft key and “DROPPED #1” will be displayed.
• To drop the second caller (the waiting call), press
[Flash] and “DROPPED #2” will be displayed.
TALK VOL-2
HOLD DIR.
123-123-4568
JOHN SMITH
ANS OPTIONS CONF
1. HOLD
2. DROP ANS
SAY BUSY BACK
987-987-6543 X6
0:00:10 VOL-2
DROP
DROPPED #1
0:01:05
