19
GETTING STARTED
WALL-MOUNTING BASE UNIT
The base unit can be mounted on a wall phone plate easily.
1. Plug the AC adapter’s barrel plug into the jack marked “500mA DC 7.9V” at the rear
end of the base unit.
2. Plug the short telephone line cord into the jack marked “TEL LINE”.
3. Hold the base unit up next to the wall jack and plug the line cord into the wall jack.
4. Place the base unit on the posts of the wall plate and push down until the unit is secured firmly.
5. Plug the AC adapter into a standard wall outlet.
Note:
If you are not using a standard wall plate to mount the phone on wall, you may also mount it
with ordinary screws. Affix two screws with vertical separation of 31/4 inches at your desired location.
Remember to leave 1/8 inch of the screw extending from the wall.
Please charge all the batteries for at least 15 hours prior to initial use.
