3
2. SAFETY INSTRUCTION – CAUTION
IMPORTANT SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS -
This Manual Contains Important
Instructions that should be Followed during Installation and
Maintenance of the UPS and Batteries
.
WARNING: Do not attempt to repair and service this UPS. This UPS
contains high voltages which could cause the risk of electrical shock.
Even this UPS is disconnected from the electrical outlet, the dangerous
voltage still may be present through the battery. All maintenance and
battery replacement should be performed by qualified service
personnel only.
1. This UPS should be placed indoors with adequate airflow and free of
contamination. To install or operate it in a clean and indoor environment,
free from moisture, flammable liquids, and direct sunlight. Ambient
temperature range must be 0°C to 40°C (32°F to 104°F).
2. This UPS is designed for Commercial/Industrial use only. It is not
intended for use with life support application and other designated
“life-critical” devices.
3. Do not remove the input power cord when this UPS is turned on. This
removes the safety ground from this UPS and the equipment connected to
the UPS.
4. Turn off this UPS and disconnect input power cord before battery
replacement.
5. Battery contains high short-circuit current. Replacing or servicing the
battery which should be performed and supervised by qualified service
personnel knowledgeable of batteries and required precautions.
Remove watches and jewelries
Use tools with insulated handles
Wear rubber gloves and boots.
Do not lay tools or metal parts on top of batteries.
Disconnect charging source prior to connecting or disconnecting
