Central Pneumatic 97187 Assembly And Operating Instructions Manual Download Page 9

SKU 97187          For technical questions, please call 1-800-444-3353. 

Page 9

PLEASE READ ThE FOLLOWING CAREFULLY

 

ThE MANUFACTURER AND/OR DISTRIBUTOR hAS PROVIDED ThE PARTS DIAGRAM IN ThIS 

MANUAL AS A REFERENCE TOOL ONLY.  NEIThER ThE MANUFACTURER NOR DISTRIBUTOR MAKES ANY 

REPRESENTATION OR WARRANTY OF ANY KIND TO ThE BUYER ThAT hE OR ShE IS QUALIFIED TO MAKE ANY 

REPAIRS TO ThE PRODUCT OR ThAT hE OR ShE IS QUALIFIED TO REPLACE ANY PARTS OF ThE PRODUCT.  

IN FACT, ThE MANUFACTURER AND/OR DISTRIBUTOR EXPRESSLY STATES ThE ALL REPAIRS AND PARTS 

REPLACEMENTS ShOULD BE UNDERTAKEN BY CERTIFIED AND LICENSED TEChNICIANS AND NOT BY ThE 

BUYER. ThE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF hIS OR hER REPAIRS TO ThE 

ORIGINAL PRODUCT OR REPLACEMENT PARTS ThERETO, OR ARISING OUT OF hIS OR hER INSTALLATION 

OF REPLACEMENT PARTS ThERETO.

PARTS LIST

Item#  Description 

Qty Item# Description 

Qty

1 Body 

Control Pin 

Rubber Gasket 

4 Ball 

5 Spring 

Hose Joint 

Rubber Gasket 

8 O-Ring 

9 Regulator 

10 Trigger 

11 Pin 

12 Pin 

13 

Housing Lock Ring 

14 Bearing 

15 Spacer 

16 

Rear End Plate 

17 Cylinder 

1

18 Vanes 

4

19 Rotor 

1

20 Bushing 

1

21 

Front End Plate 

1

22 Spacer 

1

23 Bearing 

1

24 

Cylinder Housing 

1

25 

Sanding Adapter 

1

26 

Holding Tool 

1

27 

Adapter Lock Down 

1

28 

Backing 3” Plate 

1

29 

Backing 4-1/2” Plate 

1

30 

Backing 5-1/2” Plate 

1

31 

Keyless Chuck 

32 

Chuck Center Screw 

1

90 Day Warranty

Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to 

the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of 

purchase. This warranty does not apply to damage due directly or indirectly, to misuse, abuse, negligence or accidents, repairs or al-

terations outside our facilities, criminal activity, improper installation, normal wear and tear, or to lack of maintenance. We shall in no 

event be liable for death, injuries to persons or property, or for incidental, contingent, special or consequential damages arising from 

the use of our product. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above 

limitation of exclusion may not apply to you. THIS WARRANTY IS ExPRESSLY IN LIEU OF ALL OTHER WARRANTIES, ExPRESS 

OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS.
To take advantage of this warranty, the product or part must be returned to us with transportation charges prepaid. Proof of purchase 

date and an explanation of the complaint must accompany the merchandise. If our inspection verifies the defect, we will either repair 

or replace the product at our election or we may elect to refund the purchase price if we cannot readily and quickly provide you with 

a replacement. We will return repaired products at our expense, but if we determine there is no defect, or that the defect resulted 

from causes not within the scope of our warranty, then you must bear the cost of returning the product.
This warranty gives you specific legal rights and you may also have other rights which vary from state to state.

3491 Mission Oaks Blvd.  •  PO Box 6009  •  Camarillo, CA 93011  •  (800) 444-3353

Summary of Contents for 97187











Reviews: