SKU 97187 For technical questions, please call 1-800-444-3353.
Page 4
cannot cover all possible conditions and situations that may occur. It must be understood
by the operator that common sense and caution are factors which cannot be built into this
product, but must be supplied by the operator.
ASSEMBLY
Your Sander/Drill comes assembled and ready for use as a Drill. To convert your Sander/Drill
for use as a Sander, follow the Steps below.
Sander Assembly
Disconnect the Sander/Drill from the Air Supply prior to cleaning, maintaining, or making
any adjustments to the tool.
Step 1: Place the HOLDING TOOL (26) into one of two holes in the SANDING ADAPTER (25)
as shown in FIgure 1.
Step 2: Open up the jaws of CHUCK (31) wide enough, insert screwdriver into chuck center and
loose off CHUCK CENTER SCREW (32).
Figure 1 — Installing the Holding Tool
UNPACKING
When unpacking your 5” Sander/Drill, check the items against the list below. If any parts are
missing or broken, please call Harbor Freight Tools at the number on the cover of this manual.
Item# Description
Qty
N/A
Drill Assembly
1
26
Holding Tool
1
30
5-1/2” Backing Plate
1
29
4-1/2” Backing Plate
1
28
3” Backing Plate
1
27
Adapter Lock Down
1
