GENERAL
Your Paint Shaker is a very useful air tool. It has the capacity to shake a single pint can, four 1
liter round cans, most aerosols (with caps) and square gallons. Your Paint Shaker can also
take 1/4 and 1/2 pints stacked, or singly with spacers.
UNPACKING
When unpacking, check to make sure the following parts are included. All sizes listed below are
approximate. If any parts are missing or broken, please call Harbor Freight Tools at the number
on the cover of this manual.
ITEM#
DESCRIPTION
N/A
Paint Shaker
#01
Control Valve
#02
Brass Nipple
#03
Lubricator Assembly
#04
Inlet Fitting
ASSEMBLY
Step 1:
Select a clear area on your workbench to mount the Paint Shaker. Use the appropriate
hardware. Make sure Paint Shaker is securely mounted.
Step 2:
Thread the
INLET FITTING
(#04) into the
HOUSING ASSEMBLY
(#40) and tighten
with a 5/8" wrench.
Step 3:
Thread the
LUBRICATOR ASSEMBLY
(#03) onto the
INLET FITTING
. Do not over
tighten.
Step 4:
Thread the
CONTROL VALVE
(#01) onto the
BRASS NIPPLE
(#02), already fitted to
the
LUBRICATOR ASSEMBLY
. Tighten with a 5/8" wrench.
Step 5:
Your Paint Shaker is ready for use.
NOTE
The Recommended Oil for this air
tool is 5W to 10W Non-detergent
Rust Inhibiting Air Tool Oil. DO NOT
USE MOTOR OIL.
CAUTION
Do not shake aerosols for more than one
minute. Do not shake aerosols if can
temperature is over 100
o
F.
Page #4 -- SKU: 00422