Page 5
SKU 96100
For technical questions, please call 1-800-444-3353.
Arsenic and chromium from chemically treated lumber
Your risk from these exposures varies, depending on how often you do this type of
work. To reduce your exposure to these chemicals: work in a well ventilated area,
and work with approved safety equipment, such as those dust masks that are spe-
cially designed to filter out microscopic particles. (California Health & Safety Code
§ 25249.5, et seq.)
WARNING!
13.
The warnings and precautions discussed in this manual cannot cover
all possible conditions and situations that may occur. It must be understood by the
operator that common sense and caution are factors which cannot be built into this
product, but must be supplied by the operator.
uNpAcKING
When unpacking, check to make sure all the parts shown on the
parts List in this
manual
are included. If any parts are missing or broken, please call Harbor Freight Tools
at the number shown on the cover of this manual as soon as possible.
AssEMbLy INsTRucTIONs
TO
ANGLE
GRINDER
FIGuRE A
1.
To extend the life of the Angle Grinder, it is recommended that you install an oiler and
water filter in-line with the air outlet valve of the air compressor.
(see Figure A.)
sIDE HANDLE (28)
FIGuRE b
2.
To attach the Side Handle (28), firmly screw the threaded portion of the Side Handle
into the left or right side of the Front Housing (22).
(see Figure b.)