background image

Page 16

SKU 96907

For technical questions, please call 1-800-444-3353.

changing the Hydraulic Fluid

Place a container underneath the hydraulic fluid tank to catch the fluid, and 

unscrew the cap on the bottom of the tank.
Unscrew the Hydraulic Oil Cap to speed up the draining process.

Dispose of used hydraulic fluid in a manner consistent with State, local, and 

Federal laws and regulations.  

pleAse reAd tHe FolloWing cAreFullY

THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROvIDED THE PARTS LIST AND ASSEMBLY 

DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY.  NEITHER THE MANUFACTURER OR 

DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT 

HE OR SHE IS qUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS 

qUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT.  IN FACT, THE MANUFACTURER AND/OR 

DISTRIBUTOR ExPRESSLY STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE 

UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS, AND NOT BY THE BUYER.  THE BUYER 

ASSUMES ALL  RISK AND  LIABILITY ARISING  OUT  OF  HIS  OR  HER  REPAIRS  TO  THE  ORIGINAL 

PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION 

OF REPLACEMENT PARTS THERETO.

1.

2.
3.

Summary of Contents for 96907





















Reviews: